7.5KVA Manual Auto-cut · Stabilizer
7.5KVA Manual Auto-cut
Larger-frame stabilizer with digital metering of input and output volts, and an on-load tap change switch.
- Capacity
- 7.5KVA
- Input
- 140V - 280V (as required, optional)
- Output
- Settable voltage with on load tap change switch -230V
- Metering
- Digital display: input volts / output volts
Manufactured in Gandhinagar, Gujarat. Specifications transcribed from the CKS 2026 catalogue.
Alternatives
Others in this range.
Models an integrator would weigh against 7.5KVA Manual Auto-cut, nearest first. All 7.5kva manual auto-cut
Specification
Every published figure.
| Capacity | 7.5KVA |
|---|---|
| Input | 140V - 280V (as required, optional) |
| Output | Settable voltage with on load tap change switch -230V |
| Metering | Digital display: input volts / output volts |
| Frequency | 50Hz, same as input |
| Efficiency | > 99% |
| Harmonic distortion | Nil, sine wave output (as input) |
| Overload | 120% for 60 sec. |
| Protection | Auto cut-off adjust set O/P voltage, auto reset at 1V below set voltage |
| Pre buzzer alarm | Audible alarm -5V before set cut-off voltage |