DIGITAL SIGNAL PROCESSOR – CKC 1616
DIGITAL SIGNAL PROCESSOR – CKC 1616
Key Features:
- High-performance floating-point DSP processing chip;
- 16-channel balanced input audio channel, each MIC input supports 48V phantom power supply
- 16 / 8 balanced audio output channels
- 16-channel independent adaptive feedback suppressor
- 16 channel automatic mixing
- Input each channel: pre-amplifier, noise gate, compressor, 16-band parametric equalization, delayer.
- Output per channel: 16-band parametric equalization, frequency divider, high and low pass filter, limiter, delayer
- Built-in signal generator: sine wave signal, pink noise, white noise,
- The display on the front panel displays the IP address and the current preset
- Open RS-232, TCP/IP protocol to realize third-party control
- Camera tracking code output, easy to realize the camera linkage function through the third-party central control
- Support 32 sets of scene preset functions, which can be called through TCP/IP and RS-232 protocols.
Specifications:
Audio input : 16 balanced inputs, Phoenix plug
Nominal input level : +4 dBu line or -40 dBu microphone level
Microphone preamplifier gain : 0-40 dB analog gain, 20dB digital gain
Maximum input level : +20dBu
Input impedance : >5 kΩ balanced, >3kΩ unbalanced
Common mode rejection ratio (CMRR) : >70dB @ 1 kHz
Preamplified equivalent input noise (EI N) : <-125 dBu, 2 2Hz-22kHz
Phantom power supply : +48 V DC
Audio output : 8〜20 balanced line level, Phoenix plug
Nominal output level : 0 dBu line level
Output impedance : 600 Ω balanced
DSP frequency and processing capacity : 400Mhz, 400MIPS, 2200 MFLOP
Sampling frequency/quantization : 48 kHz, 24Bit ADC, 24Bit DAC
Frequency response : 20 Hz – 20 kHz, + /- 0. 5 dB
Dynamic range : 114 dB, ADC, DAC
Total harmonic distortion : <0.01%; 20Hz〜20kHz@+4dBu
Crosstalk between channels : >-80 dB @ 1 kHz, typical
Equipment size WxDxH : 2U, 482 mm x 380mm x 88mm
Power supply : 100〜240VA, 50/60 Hz, 75W
Reviews
There are no reviews yet.